Drymix Supa Coat DIY Plaster Mix® DIY Plaster Mix

A traditional solid plaster suitable for hand mixing and application by hand. Easily applied, trowelled and worked to a flat finish by sponge, float or trowel.

Drymix Supa Coat® DIY Plaster Mix is a factory pre-mixed, pumpable, dry plaster for exterior and interior use over ridgid substrates including concrete block, stucco mesh, aerated autoclaved concrete (AAC), brick, and for masonary repairs.

Please download the specification sheet below for details of quantities and mixing instructions.

 

AVAILABLE SIZES - 20kg

 

20kg Specifications

A traditional solid plaster to be applied by accredited applicators by machine or hand. Easily applied, trowelled and worked to flat finishes. Colour is grey. Just add water.

MCL Stucco Rite NZ 660 Cement Render is a factory pre-mixed dry render suitable for pumping and solid plastering of all brick, block, aerated concrete (AAC), concrete walls and StuccoMesh. Manufactured to comply with NZS 3103 1991 sands for mortars and internal and external renderings.

This product can be used for thickness of between 5-100mm and is both a base and finish coat which can be applied using a mortar pump, a continuous mixer and by hand.

Please download the specification sheet below for details of quantities and mixing instructions.

 

AVAILABLE SIZES - 25kg

 

25kg Specifications

Website by Juicy Media